Traffic Predict

Best Time to Drive from Chula Vista to Culver City

Right now (3:50 pm PST): about 143 minutes via I-5 North and I-405 North, usually 152 at this time.

Type any two places to check another drive. Address search and routing powered by Geoapify and LocationIQ.

Typical drive time by departure time

Minutes from Chula Vista to Culver City by day and time you leave (local time)
Leave5am6am7am8am9am10am11am12pm1pm2pm3pm4pm5pm6pm7pm8pm9pm
Mon156164167162148142140138138141155158148137133127127
Tue183192186182168145142145147158186186161144133127128
Wed184199188180163148144141146153173178162141131127126
Thu176190181180161147144142148161182183165146132128127
Fri164168160156153152150154169171190188159143136128126
Sat126127135134151152160164158156155152147138134128126
Sun126126127129135145158163161153150145140136132128125

How these times are worked out: working traffic sensors measure 53% of this drive right now. The rest comes from each sensor's recorded history, the nearest working sensors and how busy the streets around each end are, put together into our best estimate. Why so few sensors work.

About this drive

On weekdays the 138-mile drive from Chula Vista to Culver City (via I-5 North and I-405 North) usually takes as little as 126 minutes and up to 199 minutes, when leaving around 6 am on Wednesdays. The fastest times to leave are after 6:30 pm. Midday (11 am to 2 pm) it takes about 148 minutes. On weekends it is slowest around 12:30 pm on Saturdays (172 minutes).

About 135 miles of it is freeway, where times follow typical and live traffic from our sensors, and about 3 miles surface streets (3 to 6 minutes on weekdays), estimated from how jammed the freeways around them are at that time. Drive times are measured from central Chula Vista to central Culver City along the route on the map. Starting or ending elsewhere in a big city can add or save several minutes.

Simulated from typical freeway speeds at each point of the drive for the time you would reach it, from every 5-minute reading we have recorded. We don't have sensors on surface streets yet, so the time on them is estimated from how congested the freeways around each end of the drive are at that time, in both directions: streets jam when the freeways do.

Questions

What is the best time to drive from Chula Vista to Culver City?

On weekdays, leave after 6:30 pm. The drive usually takes about 126 minutes then, versus up to 199 minutes at the worst times.

How long does it take to drive from Chula Vista to Culver City?

The 138-mile drive usually takes 126 to 199 minutes on weekdays, depending on when you leave, and about 148 minutes midday.

When is traffic worst from Chula Vista to Culver City?

Leaving around 6 am on Wednesdays is usually slowest, about 199 minutes.

Freeways on this drive

More drives

Open the live traffic map →